Gearwheel Flow Meter

The gear flow meter VC is application optimized through medium-specific series with different clearances. Storage variants and materials.

Zahnrad Durchflussmesser VC 9794xx/ 97PO01xxxxxxxx

Gear flow meter VC 9794xx/ 97PO01xxxxxxxx

  • Quantity measuring for oils and greases
  • For quantities of 50 mm³ and above

Technical Information

Article number
97xxxxxx
Construction
Gear motor
Mounting position
Random
Flow direction
Random
Viscosity
1...1.000.000 mm2/s, (je nach Baureihe / depending on series)
Allowed pressure loss
pmax = 16 bar
Quantity of measuring channels
2
Operating voltage
UB = 12 ... 30 V DC polarized
Impulse form with symmetrical outlet signal
Rectangular scanning relation /channel 1:1 ± 15%
Signal outlet
PNP (NPN upon request)
Impulse offset between the two channels
90° ± 30°
Energy demand
Pb max = 0,9 W
Output power / channel
Pa max = 0,3 W short-circuit-proof
Protection type normal
IP 65 DIN 40050

The gear flow meter VC is application optimized through medium-specific series with different clearances. Storage variants and materials.
It provides high precision also for small flowrates in the lower measuring range.

The meter itself is powered by the flow current in accordance with the principle of a gear motor. A two-channel scanning allows a higher resolution of the measured values as well as direction-detection of the actual flow.