Flow rate sensor 97215251.00

This sensor allows a comfortable and clear identification if the dosed medium was conveyed correctly from the dosing valve to the dosing location.

Durchflusssensor 97215251.00

97215251 .00

  • Sensor also registers failures
  • Minimum quantity of 5 mm³
  • Clear identification if the dosed medium was conveyed correctly from the dosing valve to the dosing location

Technical Information

Article number
97215251.00
Recordable dosing quantities
> 50 mm³
Pulse frequency
max. 1 signal (Reset time is depending on pressure and medium)
Medium
Oils / fluid greases
Operating temperature range
-20 - + 70°C
Dimensions housing
45x45x22
Housing material
Aluminum, anodized
Fixture
4 borings for screws M4
Cable connection
Pipe coupling ø 4 mm
Built-in installation
directly into the lubricating location supply line
Built-in position
at random, for smaller discharges, preferably vertically in flow direction
Protection type
IP 67 with cable coupling 97215181 or 97215191
Voltage supply
10 … 36 V DC
Nominal voltage
24 V DC
Switch function
PNP – contact
Output current
max. 200 mA permanent short-circuit-proof
Output signal extension
> 50/< 60 ms
Power consumption
ca. 15 Ma BEI 24
Function display
LED green = operating voltage LED yellow = lubricating signal
Connection
Plug-in connection M8x1
Pin assignment
1 (br) +/3 (b)-/2 (sw) outlet

This sensor allows a comfortable and clear identification if the dosed medium was conveyed correctly from the dosing valve to the dosing location.
Every dosing stroke of the dosing valve – even at a minimum quantity of 5 mm³ – will be indicated by an LED.

Additionally this signal can be further transmitted as acknowledge signal to the system controls.
Besides the dosing control, the sensor also registers failures such as breaks in the dosing supply, air bubbles or blockings.